Product Description
UCL Swift KF4A-HDC KIT All-In-One Active Cladding Alignment Fusion Splicer - KF4A-HDC KIT
The new KF4A-HDC is an All-In-One, active cladding alignment fusion splicer, allowing technicians to install hardened splice-on connectors in the field. This powerful splicer equips technicians to perform the major 5 functions systematically: stripping, cleaning, cleaving, splicing and protecting; as well as installing a fully compatible OptiTap® Style hardened solution (HDCFT-01), ideal for harsh environments and FTTH applications.
-
Integrates 5 functions in one unit (stripping, cleaning, cleaving, splicing and protecting)
-
The fusion splicer with All-In-One system provides the best workability on the pole and limited work spaces
-
No scratches on fiber by thermal stripping
-
Compatible with Fusion Splice-On Connector (FSOC) in accordance with the industrial standard
-
Ideal for enterprise, data centers, broadband and FTTH network application
Rotating Blade Life - 77,000 cleaves
Electrode Life - 38,000 splices
UCL Swift’s fusion splicers integrate thermal stripping, cleaning, cleaving, splicing and protecting in to one convenient unit, reducing installation time and improving connection reliability. The All-In-One system provides an excellent working platform for high productivity.
WHAT IS ALL-IN-ONE?
- No scratches from heated stripping.
- 1 second strip time.
- Over 5 kgf tensile strength of fiber after stripping.
- Featuring excellent tensile force of fiber, the automatic stripper strips up to 28mm in length without damaging the surface of fiber.
- Minimum stripping length should be longer than 7.5mm.
- One-touch pump.
- The alcohol pump can be removed and refilled with cleaning fluid.
- Avoid splashing the alcohol please cover the top part of dispenser with cleaning cotton and push it.
- Single-action cleaving.
- Designed to cleave the fiber at a 90 degree angle.
- The fiber shards are collected in the slide-type chip box placed at the side of body.
- Splicing available for 1 core.
- After splicing the fiber splice must be visually perfect.
- Shrink down takes 20-35 seconds.
- Equipped with a sleeve loader to prevent contamination and provide convenience.
- Increased productivity from built-in sleeving unit.
| Category | Description |
| Fiber alignment |
IPAAS, Active V-Groove Alignment |
| Applicable type of fibers |
0.25mm, 0.9mm, 2.0mm, 3.0mm Indoor cable |
| Fiber count |
Single fiber |
| Applicable fiber dimensions |
Cladding diameter: 125μm, Coating diameter: 150μm~3mm |
| Fiber setting and cleaved length |
0.20in to 0.63in |
| Splicing modes |
Splice mode: 300, Heat mode: 100 |
| Typical splice Loss |
SM: 0.02dB, MM: 0.01dB, DS: 0.04dB, NZDS: 0.04dB |
| Return loss |
> 60dB |
| Splicing time |
Typical 7sec with SM |
| Sleeve heating time |
Typical 13sec with IS-60 mode, IS-60 sleeve |
|
Applicable protection sleeve |
2.4in, 1.5in and micro sleeves |
|
Storage of splice result |
Data: 5,000ea up to, Image: 5,000ea up to |
|
Tension test |
1.96N to 2.25N |
|
Operating condition |
Altitude: 0~5,000m above sea level, Temperature: -14°F~122°F, Humidity: 0~95%, Wind: 15m/s, non-condensing, dust proof, water proof, shock proof |
|
Storage condition |
Temperature: 40°F~176°F, Humidity: 0~95% |
|
Dimension |
4.9(W) x 7.4(L) x 3.0(H)in (without rubber protector) |
|
Weight |
5.3lb (including battery) |
|
Viewing method and display |
2 AXIS Two CMOS cameras with 4.3-inch color LCD monitor |
|
Fiber view and magnification |
X/Y: 130X , Max: 260X |
|
Power supply |
Li-ion Battery(DC 14.8V, 3400mAh), 100 ~ 240V AC charger |
|
No. of splice cycles with battery |
Typical 200 cycles |
|
Electrode life |
38,000 splices |
|
Blade life |
75,000 |
|
Terminals |
USB |
Standard Package
| Category | Model | Q’ty |
| Arc Fusion Splicer |
SWIFT KF4A |
1
|
| Battery |
KF-3400 |
1
|
|
Battery Adapter |
FY1701000 |
1
|
|
Instructions for use |
– |
1 pair
|
| Spare electrode |
EI-24 |
1 pair
|
| Transporting Case |
HC-11(Hard Case) |
1
|
|
Optical fiber holder |
– |
1 Pair
|
|
Cooling Tray |
CT-01(1.5in) |
1
|
|
Allen wrench |
LD-3300 |
1
|
|
USB Cable |
– |
1
|
|
Hard Brush |
1
|
|
|
Soft Brush |
1
|
|
|
Tool Box |
1
|
|
|
Tweezer |
1
|
