Optix Jackknife 4 in 1 Cable Prep Tool - J4N1

Spec Sheet   FEATURES Multifunctional high precision fiber cable and drop cable prep tool Includes tri-hole stripper, kevlar scissors, lint free cotton for cleaning fiber, and drop cable stripper all in one tool Exceptional time saving tool for...

Jonard Replacement Blade for AST-200 CableSaber (Pack of 2) - AST-200RB

Spec Sheet This is a two pack of replacement blades for the AST-200 CableSaber™. These blades feature the following: Precision steel blade will cut through the toughest materials and ensure no damage to the internal...

Jonard CableSaber Armored Mid-Span Cable Slitter & Ring Tool - AST-200

Spec Sheet The Jonard Tools CableSaber™ is the ultimate tool for gaining mid-span access to armored or thick jacketed cables 4 mm-28.6 mm (0.157”-1.125”) in diameter. This mid-span cable slit and ring tool also features the...

Jonard Telecom Diagonal Cutting Pliers, 6-1/4" - JIC-7858

Spec Sheet Jonard’s diagonal cutting pliers are made of polished chrome vanadium steel and are heat-treated for maximum strength and durability. These diagonal cutting pliers feature the following: Induction-hardened cutting edge to provide a...

Jonard - Submariner Cable & Large Duct Slitter - RCS-50

Spec Sheet Designed to open the toughest heavy-duty cable and duct jackets, the RCS-50 is perfect for performing lateral and longitudinal cuts on submariner cables, large fiber ducts, or large count telephone cables at least 1 1/2" (3.81 cm) in...

Jonard Thin-walled Microduct Scoring Tool, 14/10 and 16/10 - FS-1416

Spec Sheet The Jonard Tools Microduct Scoring Tool is perfect for scoring and ringing 10/8 and 12/10 fiber optic microducts without damaging the fibers inside. This scoring tool features the following: Unique design allows you to score and...

Jonard Thin-walled Microduct Scoring Tool, 10/8 and 12/10 - FS-1080

Spec Sheet The Jonard Tools Microduct Scoring Tool is perfect for scoring and ringing 10/8 and 12/10 fiber optic microducts without damaging the fibers inside. This scoring tool features the following: Unique design allows you to score and...

Jonard Flush Cut Kevlar Cutter - JIC-190

Spec Sheet Thin-nose jaws provide easy access into tight places and allow for flush cutting of Kevlar to the fiber jacket Serrated edge holds Kevlar in place for clean and precise cutting Non-serrated blade can be sharpened for continuous long...

Ripley Kevlar Shears - KC699 *Clearance*

Manufacturer P/N: KC699 This item is on clearance and will not  re-stock when sold out. Limited stock available.  

Ripley Kevlar Shears - 86-1/2S *Clearance*

Use to cut and trim wire insulation materials, copper leads, filament wire, and nickel-ribbon Use 86 1/2SF to trim DuPont Kevlar® Aramid fibers Hot-forged, high carbon steel for long life 86 1/2SF is a high-leverage tool for cutting, trimming and...

Jonard Molded Tool Pouch - H-25

The Jonard Tools H-25 Molded Tool Pouch is made for use with our JIC-186 Wire & Kevlar® Cutting Shears. It can hold either tool, one at a time, for easy storage and portability. This tool pouch is made of nylon for high durability and...

Jonard Micro Duct Cutter - MDC-64

Spec Sheet Designed to cut large fiber ducts up to 64 mm (2.52”) in diameter, this fiber duct cutter is perfect for cutting PVC, CPVC, PE, HDPE, PEX and other nonmetallic tubing. This fiber duct cutter features the following: Triangular blade...

Jonard Micro Duct Cutter - MDC-28

Spec Sheet Designed to create quick, clean, and straight cuts in fiber ducts up to 1 1/8" - (28 mm), this duct cutter is perfect for cutting PVC, CPVC, HDPE, and other plastic tubing. The micro duct cutter features the following: Triangular blade...

Miller Ripley ACS Replacement Blade CB 251

Replacement blade for the ACS (37880) and ACS-2 (37897) Manufacturer P/N: 37884

Miller Ripley ACS Armored Cable Slitter

Spec Sheet Versatile design allows jacket or shield slitting on non-fiber optic configurations as well Tool slits outer polyethylene jacket and armor in one operation Performs longitudinal slitting and circumferential (ringing) for end stripping Blade...

Miller Ripley ACS-K Armored Cable Slitter

Spec Sheet Cable Access: Mid-Span, End Min Cable Outer Diameter: .157"(4mm) Max Cable Outer Diameter: 1.125"(28.6mm) Adjustable Blade Depth: Up to .22"(5.5mm) Cable Material: Armored, Corrugated Copper, Armored Steel, Armored Aluminum The Miller ACS-K...

Jonard Web Slitter & Shaving Tool - WSS-4625

Spec Sheet Designed to slit and shave the webbing off messengered hardline COAX cables and figure 8 fiber cables, the Jonard Tools WSS-4625 Web Slitter and Shaver is the perfect tool for working with aerial messenger cables ranging from 0...

Jonard Heavy Duty Utility Knife Replacement Blades, 50pk - UKN-50RB

Spec Sheet Made in the USA, this pack of 50 utility blades is perfect for replacing blades in a utility knife, such as our UKN-3. These utility blades feature the following: Ultra-sharp US-made 1095 carbon steel heavy duty blades cut through drywall,...

Jonard Heavy Duty Utility Knife - UKN-3

Spec Sheet Designed for heavy duty use, this utility knife is the perfect addition to any tradesman or technician's tool kit. This utility knife features the following: Push button allows you to change blades without needing other tools Zinc alloy die...

Jonard High Leverage Diagonal Cutting Pliers, 8"- JIC-2288

Spec Sheet Jonard’s diagonal cutting pliers are made of polished chrome vanadium steel and are heat-treated for maximum strength and durability. These high leverage diagonal cutting pliers feature the following: Induction-hardened cutting edge to...