PLP 24F Lite-Grip Splice Tray - 80809958

Spec Sheet Each tray includes 6 - 4F splice chip inserts and velcro straps 6 1/4"W x 7 1/2"L x 3/8"H Dimensions Used with Coyote Runt, Expanded Runt, Pup, Coyote One Dome, 6.5 x 17 Dome, 6.5 x 22...

PLP Blue Felt Strips - 6 Pack - 8003490

6 Strips per pack Each strip measures 9" x 1" Adhesive back Replacement felt strips for Preformed splice trays. Manufacturer P/N: 8003490

PLP 12F Low Profile Splice Tray - 80807701

Spec Sheet Each tray includes tie wraps and velcro straps 5 1/2"W x 7 1/2"L x 3/8"H Dimensions Used with Coyote Runt, Expanded Runt, Pup, Coyote One Dome, 6.5 x 17 Dome, 6.5 x 22 Dome, 6.5 x 28...

PLP 12F Splice Tray - 80806033

Spec Sheet 5 1/2"W x 7 1/2"L x 1/2"H Dimensions Includes 12F splice chip, velcro strap and tie wraps Used with COYOTE RUNT and PUP closures Single fusion and single mass fusion 12F...

PLP 144F Count Ribbon Splice Tray - 80805515 *Clearance*

Preformed Line Products 144F Splice Tray *This item is on clearance and will not  re-stock when sold out. Limited stock available.

PLP 36F Low Profile Splice Tray - 8001127

Spec Sheet 5 1/2"W x 12"L x 1/4"H Dimensions Includes (3) 12F splice chip, velcro strap and tie wraps Used with COYOTE closures Single fusion and single mass fusion 36F low profile splice tray...

PLP 36F Splice Tray - 80805514

Spec Sheet 5 1/2"W x 12"L x 1/2"H Dimensions Includes (3) 12F splice chip, velcro strap and tie wraps Used with COYOTE closures Single fusion and single mass fusion 36F splice tray used with...

PLP 7/8" Future Cable Port Entry Install Kit - 8003289

Future Cable Port Installation Kit;  When installed during the initial assembly,  Future Cable Ports allow for the addition of branch cables in the future with no disruption to the...

PLP C-Cement Adhesive - 80802377

Spec Sheet 4 Oz. can 12 cans per case C-Cement is required for both cable preparation and End Plate preparation, but is not supplied with Splice Cases or End Plate Kits. Manufacturer P/N: 80802377

PLP Coyote Dome Closure 6.5 x 17 - 8006944

Spec Sheet 6.5 in. dome end plate provides four cable entry ports accepting max. cable diameters up to 1 1/4 in. Segmented end plate designs are re-enterable, reusable and allow independent access...

PLP Coyote Dome Closure 6.5 x 22 - 8006877

Spec Sheet 6.5 in. dome end plate provides four cable entry ports accepting max. cable diameters up to 1 1/4 in. Segmented end plate designs are re-enterable, reusable and allow independent access...

PLP Coyote Dome Closure 9.5 x 19 - COYD919B-000

Spec Sheet The COYOTE® Dome Closures have the versatility and features that make it a perfect choice for fiber-to-the premises networks. Both the 6.5" and 9.5" dome closure...

PLP Coyote Dome Closure 9.5 x 28 - 80061055

Spec Sheet The COYOTE Dome Closure was built from the ground up using the same craft-friendly fiber management technology that placed the COYOTE family among the most respected and...

PLP Coyote DTC (Drop Termination Closure)- COYDTC-001

Spec Sheet In-Line or Butt Splice configurations A variety of applications: direct buried, below grade, pole/wall mount or aerial Flexible grommet sealing technology supports a wide range of flat...

PLP Coyote ONE Dome Closure - COY1-001

Spec Sheet • Size: 16" L x 10" W x 5.7" H(406 mm x 254 mm x 145 mm)• Max. Splice Capacity:120 Single Fusion Splices - 24F Low Profile Splice Tray (5) 80 Single Fusion Splices - 40F Deep...

PLP Coyote Runt Universal Wall/Pole Mount Bracket 8003571 *Clearance*

COYOTE® Universal Wall/Pole Mount Bracket 1 Bracket per box *This item is on clearance and will not  re-stock when sold out. Limited stock available.

PLP COYOTE® Lite-Grip® Splice Tray, Single Fusion, 40 Count - 80808945

This Lite-Grip® standard tray can hold 40 single fusion splice sleeves. It is also compatible with a variety of PLP® products. Splice Capacity - 40 Single Fusion Splice Sleeves Retention...

PLP Elastomeric Blocks - 8003381

Rubber splice block. 12 splices per block 3 splice blocks per package Holds up to 12 splices per block. 3 blocks per packages. Sold per pack. Manufacturer P/N: 8003381

PLP Lock - Tape (DR Tape) 1 in x 15 ft - 80805925

15 Foot Roll 1" Wide .045" thick LOCKTAPE Sealant strips used between End Plate Sections Manufacturer P/N: 80805925

PLP Moray Shield Connector - 8000745

 Spec Sheet The MORAY Shield Connectors have a “spring-action” top plate that remains in contact with the shield at all times. The “spring-action” feature is designed to...