Product Description
UCL Swift KF4AV All-In-One Active Cladding Alignment Fusion Splicer -Swift KF4AV
The Swift All-In-One KF4AV is a top-tier fusion splicer with precise alignment capabilities and the addition of a VFL and InGaAs power meter. The KF4AV systematically performs the 5 major functions including stripping, cleaning, cleaving, splicing and protecting. This device ensures optimum optical functionality and eliminates the extra time and expenses used to correct errors.
- Remote maintenance via Internet
- Integrated 5 function in one unit (stripping, cleaning, cleaving, splicing, protecting)
- Internally-installed Visual Fault Locator (VFL) utilizes a 650nm red laser to locate and visibly display any failure points throughout the cable such as fiber breaks, flawed splices or connectors, and other issues
- Internally-installed InGaAs (indium, gallium, arsenide) power meter can detect the amount of power that is lost during transmission, helping potential errors to be corrected before the cable goes into use
Rotating Blade Life - 75,000 cleaves
Electrode Life - 38,000 splices
UCL Swift’s fusion splicers integrate thermal stripping, cleaning, cleaving, splicing and protecting in to one convenient unit, reducing installation time and improving connection reliability. The All-In-One system provides an excellent working platform for high productivity.
WHAT IS ALL-IN-ONE?
- No scratches from heated stripping.
- 1 second strip time.
- Over 5 kgf tensile strength of fiber after stripping.
- Featuring excellent tensile force of fiber, the automatic stripper strips up to 28mm in length without damaging the surface of fiber.
- Minimum stripping length should be longer than 7.5mm.
- One-touch pump.
- The alcohol pump can be removed and refilled with cleaning fluid.
- Avoid splashing the alcohol please cover the top part of dispenser with cleaning cotton and push it.
- Single-action cleaving.
- Designed to cleave the fiber at a 90 degree angle.
- The fiber shards are collected in the slide-type chip box placed at the side of body.
- Splicing available for 1 core.
- After splicing the fiber splice must be visually perfect.
- Shrink down takes 20-35 seconds.
- Equipped with a sleeve loader to prevent contamination and provide convenience.
- Increased productivity from built-in sleeving unit.
| Category | Description |
| Fiber alignment |
IPAAS Active Cladding Alignment |
| Applicable type of fibers |
0.25mm, 0.9mm, 2.0mm, 3.0mm Indoor cable |
| Fiber count |
Single fiber |
| Applicable fiber dimensions |
Cladding diameter : 125μm, Coating diameter : 150μm~3mm |
| Fiber setting and cleaved length |
0.20in to 0.63in |
| Splicing modes |
Splice mode: 300, Heat mode: 100 |
| Typical splice loss |
SM: 0.02dB, MM: 0.01dB, DS: 0.04dB, NZDS: 0.04dB |
| Return loss |
> 60dB |
| Splicing time |
Typical 7sec with SM |
| Sleeve heating time |
Typical 13sec with IS-60 mode, IS-60 sleeve |
| Applicable protection sleeve |
2.4in, 1.5in and micro sleeves |
| Storage of splice result |
Data: 5,000ea up to, Image : 5,000ea up to |
| Tension test |
1.96N to 2.25N |
| Operating condition |
Altitude: 0~5,000m above sea level, Temperature: -14°F~122°F, Humidity: 0~95%, Wind: 15m/s, non-condensing, dust proof, water proof, shock proof |
| Storage condition |
Temperature: 40°F~176°F, Humidity: 0~95% |
| Dimension |
132(W) x 212(L) x 73(H)mm (without rubber protector) |
| Weight |
1.5kg (Including battery) |
| Viewing method and display |
2 AXIS Two CMOS cameras with 4.3-inch color LCD monitor |
| Fiber view and magnification |
X/Y: 110X , Max: 220X |
| Power supply |
Li-ion Battery (DC 14.8V, 3400mAh), 100 ~ 240V AC charger |
| No. of splice cycles with battery |
Typical 200 cycles |
| Electrode life |
38,000 splices |
| Blade Life |
75,000 |
| Terminals |
USB |
Standard Package
| Category | Model | Q’ty |
| Arc Fusion Splicer |
SWIFT KF4AV |
1
|
| Battery |
KF-3400 |
1
|
|
Battery Adapter |
FY1701000 |
1
|
|
Instructions for use |
– |
1 pair
|
| Spare electrode |
EI-24 |
1 pair
|
| Transporting Case |
HC-11(Hard Case) |
1
|
|
Optical fiber holder |
– |
1 Pair
|
|
Cooling Tray |
CT-01(1.5in) |
1
|
|
Allen wrench |
LD-3300 |
1
|
|
USB Cable |
– |
1
|
|
Hard Brush |
1
|
|
|
Soft Brush |
1
|
|
|
Tool Box |
1
|
|
|
Tweezer |
1
|
